Having issues with checkout? Call us at
833-926-2323
For the time being, please use PayPal as the preferred payment method,
while we are working on improving our native checkout process.
0 of 0 people found the following review helpful:
Aleko 900 Gate Opener Install Improvements
May 16, 2023
Reviewer:
Tom Wollschlaeger from Nanaimo, BC Canada
Install manual Adjusting the Limit Switch not helpful. My procedure for Dual Gate: - use release key to disable actuator, stablize gate in desired close position - detach actuator arm from gate, fully extend arm and tape measure distance from arm end to magnetic ring in actuator cylinder ~1/2 inch in. - reinstall actuator to gate, release key to reset, with previous measurement, measure from arm end back to the actuator cylinder. Mark location in pencil then unscrew Limit Switch B and position 'screw' at pencil mark. - repeat on other actuator - test gate open & close. If gap results on closure, note gap size in inches. - IMPORTANT to reopen gate, then make adjustments, not when closed. For every 1 inch, adjust Limit Switch by 1/8 inch or less. Logic says, if arm is over extended, then move Limit Switch B closer in direction of Limit Switch A. Else if under extended, move Limit Switch B away from Limit Switch A. - Test gate & repeat only fine adjustments.
Aleko 900 Gate Opener Install Improvements 
